DA 70 ANNI CERTI DI ESSERE UNICI

 SPESE DI SPEDIZIONE GRATUITE SOPRA I €200 

Implacem Automix

SKU: PR0072AUT
Cement for the definitive fixation of prostheses
Packaging:
2 automix syringes of 5 ml each, 15 mixing tips
Available

Used by many top prosthodontic specialists, ImplaCem is considered the reference material for definitive fixation of prostheses on abutments, as it optimally meets a wide range of important requirements. No other definitive cement for implantology is as highly regarded as ImplaCem.

EASY TO REMOVE BUT STABLE OVER TIME

Good resistance in case the prosthesis needs to be removed (only 30 MPa), combined with long-term stability and reliability typical of a definitive fixation.

EASY EXCESS REMOVAL

ImplaCem is a self-curing composite-based cement that can be applied easily and quickly. Excess material becomes rubbery and can be easily removed 2 minutes after application.

VERY THIN FILM THICKNESS

- A film thickness of only 15 microns prevents elevation even in the most precise works.

- Very low solubility

- Optimal marginal adaptation to prevent plaque accumulation

- Can be used as a long-term provisional on natural teeth

"Ne apprezzo la facilità di uso. Semplice rimozione delle eccedenze. Buona tenuta e stabilità nel tempo. Lo uso sia come cemento di fissaggio per impianto che come provvisorio di lunga dorati per protesi” 
Dott. Ruggero Biondi, Arezzo (AR)

 

"Ottimo prodotto per cementazione di corone su impianti. È valido anche per corone di denti naturali. Crea un film sigillante sottilissimo...Attenzione però a rimuoverne tutti gli eccessi!" 
Dott. Giuseppe Frazzingaro, Santa Sofia D'Epiro (CS)

 

"Ottima soluzione per cementazioni stabili ma reversibili, specialmente su impianti"
Dott. Paolo Samarè – Russi (RA)


 

"Buona resistenza pur non essendo un cemento definitivo e ottima rimozione degli eccessi"
Dott.ssa Laura Paini – Milano (MI)

Product specifications
Product Line ImplaCem
Type Implant
Flexural Strength 60 MPa
Linear Shrinkage 2.5%
Solubility 2 µg/mm3
Working Time 1.5-3.5 min
Film Thickness 10 µm
Packaging Automix Syringe
Storage < 25°C
Medical Device Class IIA
*
*
*
*
*
Product specifications
Product Line ImplaCem
Type Implant
Flexural Strength 60 MPa
Linear Shrinkage 2.5%
Solubility 2 µg/mm3
Working Time 1.5-3.5 min
Film Thickness 10 µm
Packaging Automix Syringe
Storage < 25°C
Medical Device Class IIA